Network Options
In the Network Options panel, on the Veritas System Recovery Disk Creation Wizard, the selected network options are used when you want to recover images from a network location. To recover images over a network location, you need to access the remote network location. The network options are applicable when you boot into theVeritas System Recovery Disk.
The following table describes the options on the Network Options panel.
Related information
Table: Network Options
| Option | Description |
|---|---|
| Automatically start network | Automatically starts network services when you recover the |
| services | computer through LightsOut Restore. Select this option if you want to enable network services in a recovery environment. |
| Dynamic IP | Connects to a network without the need for additional |
| network configuration. You can click this option if you | |
| know there is a DHCP server available on the network | |
| at the time you restore. | |
| Static IP | Connects to a network with a particular network |
| adapter and specific address settings. You should select | |
| this option only if you know there is no DHCP server (or the | |
| DHCP server is unavailable) when you want to recover data. | |
| Use Windows firewall settings | Applies the local computer's firewall settings to the recovery environment. For example, if you turn on the firewall for your local computer and then select this option, the firewall settings are applied for the recovery environment too. |